Page 29 - SPEMD_62-3

rev port estomatol med dent cir maxilofac . 2021;62(3):150-156 155

For this study, a knife -edge margin was selected. Avail- 3. Ruse ND, Sadoun MJ. Resin -composite Blocks for Dental CAD/
able literature relates this preparation design to crowns with CAM Applications. J Dent Res. 2014;93:1232 -4.
lower resistance values but still higher than the occlusal 4. Goujat A, Abouelleil H, Colon P, Jeannin C. Mechanical
34
loads described. Although the type of margin was not one properties and internal fit of 4 CAD -CAM block materials. J
Prosthet Dent. 2018;119:384 -9.
of the variables studied in this study, it is also expected to 5. Rosentritt M, Hahnel S, Engelhardt F, Behr M. In vitro
affect the evaluated material. Therefore, studies focused on performance and fracture resistance of CAD/CAM -fabricated
the relationship between margin design and fracture resis- implant supported molar crowns. Clin Oral Invest.
tance are needed. Moreover, future studies should replicate 2017;21:1213 -9.
the conditions of the oral environment by applying cyclic 6. Ferracane JL. Resin composite–state of the art. Dent Mater.
and/or thermodynamic loads to mimic the fatigue suffered 2011;27:29 -38.
by restorations. 7. Gracis S, Thompson VP, Ferencz JL, Silva NR, Bonfante EA.
A new classification system for all -ceramic and ceramic-
-like restorative materials. Int J Prosthodont. 2015;28:227-
-35.
Conclusions 8. Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ.
From Artisanal to CAD -CAM Blocks: State of the Art of
Crowns cemented with self -adhesive resin cement showed Indirect Composites. J Dent Res. 2016;95:487 -95.
higher fracture resistance than those cemented with RMGI, 9. Awada A, Nathanson D. Mechanical properties of resin-
making it preferable to the cementation of full -contour resin -ceramic CAD/CAM restorative materials. J Prosthet Dent.
2015;114:587 -93.
nanoceramic crowns. 10. Coldea A, Swain MV, Thiel N. Mechanical properties of
polymer -infiltrated ceramic -network materials. Dent Mater.
2013;29:419 -26.
Acknowledgments 11. Charlton DG, Roberts HW, Tiba A. Measurement of select
physical and mechanical properties of 3 machinable ceramic
materials. Quintessence Int. 2008;39:573 -9.
The authors would like to thank GC Corporation for providing 12. Mormann WH, Bindl A, Luthy H, Rathke A. Effects of
the CAD/CAM blocks and cements evaluated in this study.
preparation and luting system on all -ceramic computer-
-generated crowns. Int J Prosthodont. 1998;11:333-9.
13. Bindl A, Luthy H, Mormann WH. Strength and fracture
Ethical disclosures pattern of monolithic CAD/CAM -generated posterior crowns.
Dent Mater. 2006;22:29-36.
Protection of human and animal subjects. The authors 14. Lim M, Lee K. Effect of adhesive luting on the fracture
declare that no experiments were performed on humans or resistance of zirconia compared to that of composite resin
and lithium disilicate glass ceramic. Restor Dent Endod.
animals for this study.
2017;42:1-8.
15. Attia A, Abdelaziz KM, Freitag S, Kern M. Fracture load of
Confidentiality of data. The authors declare that no patient
data appear in this article. composite resin and feldspathic all -ceramic CAD/CAM
crowns. J Prosthet Dent. 2006;95:117-23.
Right to privacy and informed consent. The authors declare 16. Weyhrauch M, Igiel C, Scheller H, Weibrich G, Lehmann KM.
that no patient data appear in this article. Fracture Strenght of Monolithic All -Ceramic Crowns on
Titanium Implant Abutments. Int J Oral Maxillofac Implants.
2016;31:304 -9.
17. Castro EF, Azevedo VLB, Nima G, Andrade OS, Dias CTDS,
Conflict of interest Giannini M. Adhesion, Mechanical Properties, and
Microstructure of Resin -matrix CAD -CAM Ceramics. J Adhes
The authors have no conflicts of interest to declare. Dent. 2020;22:421 -31.
18. Yoshihara K, Nagaoka N, Maruo Y, Nishigawa G, Irie M,
Yoshida Y, Van Meerbeek B. Sandblasting may damage the
surface of composite CAD -CAM blocks. Dent Mater.
orcid 2017;33:e124 -35. Epub 2017 Jan 2.
19. Jorgensen K. Acta Odontol Scand. Factors affecting the film
Joana Guerreiro 0000-0001-7614-4666 thickness of zinc phosphate cements. 2009;18:479 -90.
20. Sorrentino R, Nagasawa Y, Infelise A, Bonadeo G, Ferrari M. In
Rafael Dias 0000-0003-2334-9945
Vitro Analysis of the Fracture Resistance of Cad -Cam
José Carracho 0000-0002-4583-1866 Cerasmart Molar Crowns with Different Occlusal Thickness.
Biomed J Sci Tech Res. 2018;3:3074-9.
21. Ferrario VF, Sforza C, Serrao G, Dellavia C, Tartaglia GM. Single
tooth bite forces in healthy young adults. J Oral Rehabil.
references 2004;31:18-22.
22. Okada R, Asakura M, Ando A, Kumano H, Ban S, Kawai T, et al.
1. Al -Musawi RMA, Farid F. Computer -Based Technologies in Fracture strength testing of crowns made of CAD/CAM
Dentistry: Types and Applications. J Dent (Tehran). composite resins. J Prosthodont Res. 2018;62:287-92.
2016;13:215 -22.
2. Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an 23. Nakamura K, Mouhat M, Magnus J, Jenssen S, Kanno T,
Milleding P, et al. Effect of cements on fracture resistance of
overview of recent developments for CAD/CAM generated monolithic zirconia crowns. Acta Biomater Odontol Scand.
restorations. Br Dent J. 2008;204:505 -11.
2016;2:12 -9.